The fertilizer pellet machine adopts the couple roller. Between the rollers, there is
certain gap. Using double output shaft reduction machine, makes the couple
roller in phase and run face to face. One group of roller axle seat is fixed and
another group of roller axle seat is slipped. With the support of the pressure
of hydraulic cylinder, they are close to each other and the hydraulic system can
has the action of compensation and protection. In the surface of the roller, the
hole (arc trough) of many shapes and same size are arrayed. According to the
different compression rate of the materials, choose the trough of one roller ( https://www.hnfertilizermachine.com/ )aiming at the trough of another roller, or peak to trough. Two rollers is
arranged in horizon. The powder material on itself weight is compulsorily feed
into the gap between two rollers over the rollers continuously and equally. When
the material enters into the gripping area, it is gripped by the roller of the fertilizer pellet machine. With
the continuous turning or the roller, the occupied space of the material is less
and less and gradually compressed and reaches the max value of the formation
pressure. Then, the pressure gradually reduces. The flakes due to its elasticity
and self weight breaks off the arc trough, and enter into the cutting and
pelletizing device and sieves into the pellet.
1.Adwangtages of fertilizer pellet machine
this fertilizer pellet machine can make the
fullest use of natural resources, have good rigidity, perfect
smoothness, long shelf life and standard degree of moistness.
The fodder will be
nearly cooked during the processing which can greatly increase the proportion
of take-in nutrition.
And reduce the zymolysis time of fertilizers.
No comments:
Post a Comment